ProPanel Logo

Techwood custom panels let you be creative in a cost effective way.

Using edge glued, face glued and finger jointed techniques we can create almost any panel configuration.

The length of full stave panels is limited only by the maximum available lumber length.

This is where a single board (stave) is used for each board in the panel, as in the panel shown to the left.

The maximum width of full stave panels is only limited by shipping and handling issues.

Finger jointed panel width and length are only limited by shipping and handling issues.

Panel thickness can be single or multiple layers, with alternating orientations to maximize grain properties.

Single layer panels are available in 2/4, 3/4, 4/4, 5/4,6/4 and 8/4 thicknesses

Multiple species panels using custom board widths and special edge designs are also easy to produce in our system.

Thin layers of wood can be used at each joint for special emphasis.

Contact us today and let us know what you would like in a custom panel.